Joint-It Premium Seal
PRES1
Natural Stone & Concrete Cleaner for paving, paths, roof tiles and walls.
Storage
Keep in a dry place between 5°C and 30°C in the original container.
Benefits
- Ready-to-use
- Stain Resistant
- Quick Drying
- Breathable
- Environmentally Friendly
- Strong and Effective
- Also suitable for use on paths, roof tiles and walls.
Surface Preparation
Remove surface contamination.
Surface should be clean, free from dust, dirt, oil, efflorescence, organic growth, coatings, sealers and old paint films.
Treat any algae and mould prior to application of Joint-It Premium Seal.
Cracks in surface should be repaired prior to application of Joint-It Premium Seal.
Coverage
Coverage depends on the porosity, type and texture of your surface.
A general guideline is 5-8m² per litre.
Find out how much you will need by using our calculator.
Precautions For Use
Do not apply Joint-It Premium Seal if rain is expected in four hours.
Do not dilute this product.
Product works immediately but it may take up to 7 days to reach 100% efficacy.
Do not apply a second coat if first coat has dried.
Do not apply during rain or frost or when temperature drops below 3°C or above 30°C.
Wear protective gloves, glasses and appropriate clothing while using Joint-It Premium Seal.
Keep children and pets off surface until it is completely dry.
Keep out of the reach of children.
Application Instructions
Always test a small hidden area before using this product.
Do not dilute this product.
Using a low pressure spray, roller or brush, apply product to the point of saturation. Ensure application is from bottom to top on vertical surfaces. Take care not to let the product run.
As the product starts to soak into the substrate, add a second coat, if required. DO NOT ALLOW PRODUCT TO DRY BETWEEN APPLICATIONS.
Clean equipment and tools with water immediately after use.
PRODUCT CALCULATOR: https://jointit.com/product-calculator/