DeWalt DCH333N 54V XR FLEXVOLT Brushless 3-Mode SDS-Plus Hammer Drill – Body Only

54V XR FLEXVOLT | Brushless Motor | 3.5J Impact Energy | 30mm Concrete Drilling Capacity | 3 Operating Modes | SDS-Plus Tool Holder | Perform & Protect | LED Work Light

Take on demanding drilling and light chiselling applications with the DeWalt DCH333N 54V XR FLEXVOLT Brushless SDS-Plus Hammer Drill.

Designed for professional tradespeople and demanding construction projects, this powerful cordless rotary hammer combines the performance of a heavy-duty drilling tool with the freedom and flexibility of DeWalt's 54V XR FLEXVOLT battery platform.

Featuring a high-efficiency brushless motor, 3.5 joules of impact energy and a maximum concrete drilling capacity of 30mm, the DCH333N is ideal for drilling anchor holes, installing fixings and carrying out masonry work.

Its versatile three-mode operation allows you to switch between hammer drilling, rotary-only drilling and light chiselling, making it suitable for a wide range of building, renovation and installation tasks.

With DeWalt's Perform & Protect vibration-control design, an integrated LED work light and an ergonomic construction, the DCH333N is built for productivity and comfort on demanding jobs.

IMPORTANT: This is a body-only product. A battery and charger are NOT included. A compatible DeWalt 54V XR FLEXVOLT battery and charger are required and must be purchased separately if you do not already own them.

Key Features & Benefits

• 54V XR FLEXVOLT Cordless Power: Heavy-duty performance without the restriction of a mains power cable.

• High-Efficiency Brushless Motor: Improved energy efficiency, runtime and reduced motor maintenance.

• 3.5J Impact Energy: Powerful hammer action for concrete and masonry drilling.

• 30mm Maximum Concrete Capacity: Suitable for demanding anchor and fixing applications.

• Three Operating Modes: Hammer drilling, rotary drilling and chiselling.

• SDS-Plus Tool Holder: Designed for compatible SDS-Plus drill bits and chisels.

• Up to 1,000 RPM: Variable no-load speed for controlled drilling.

• Up to 4,480 BPM: High-frequency hammer action for efficient masonry drilling.

• Perform & Protect Technology: Designed to help manage vibration exposure.

• Low-Vibration Design: Published vibration values include 7.5m/s² for hammer drilling into concrete and 8.5m/s² for chiselling.

• Integrated LED Work Light: Bright white illumination with a delay feature.

• Ergonomic Construction: Designed for control and comfort during extended work.

• Multi-Position Side Handle: Additional grip and control.

• Cordless Flexibility: Ideal for building sites, renovations and locations without convenient mains power.

• Body-Only Supply: Suitable for customers who already own compatible DeWalt FLEXVOLT batteries and chargers.

54V XR FLEXVOLT – Heavy-Duty Cordless Performance

The DeWalt DCH333N is part of the 54V XR FLEXVOLT cordless power tool range, designed to deliver the performance required for demanding professional applications.

The FLEXVOLT platform combines cordless convenience with the power needed for drilling into tough materials.

With a compatible 54V XR FLEXVOLT battery fitted, the DCH333N can be used across building sites, renovations and installation projects without relying on an extension lead.

This makes it particularly useful for working in unfinished buildings, outdoor locations and areas where mains power is inconvenient.

Please note: Standard 18V XR batteries are not a substitute for the required 54V XR FLEXVOLT battery.

Powerful 3.5J Impact Energy

The DCH333N delivers 3.5 joules of impact energy, providing the hammering force needed for drilling into concrete, brick and masonry.

This makes it well suited to demanding applications such as:

• Installing concrete anchors

• Drilling fixing holes

• Mounting brackets and supports

• Installing structural and mechanical fixings

• Electrical and plumbing installation work

• General building and renovation projects

Its SDS-Plus hammer mechanism helps deliver efficient drilling performance in suitable masonry materials.

Up to 30mm Concrete Drilling Capacity

With a maximum drilling capacity of 30mm in concrete, the DCH333N is designed to handle a wide range of professional fixing and anchoring tasks.

DeWalt recommends the tool for drilling anchor and fixing holes between 4mm and 30mm in concrete, brick and masonry.

The suitable drilling diameter will depend on the material, bit type and application.

Always use compatible SDS-Plus accessories and follow the manufacturer's operating instructions.

Three Operating Modes for Versatility

The DeWalt DCH333N offers three operating modes, allowing you to select the correct action for the task.

1. Hammer Drilling Mode

Combines rotation and hammer action for drilling into concrete, brick and masonry.

Ideal for anchor holes, fixings and general construction drilling.

2. Rotary-Only Drilling Mode

Disables the hammer action for drilling into materials such as wood and metal.

A suitable SDS-Plus-compatible drilling accessory or approved adapter is required.

3. Chiselling Mode

Stops rotation and uses the hammer action for light chiselling tasks.

Suitable applications include removing tiles, working on plaster and carrying out light render removal.

The tool is intended for light chiselling rather than replacing a dedicated heavy-duty demolition breaker.

Brushless Motor Technology

The DCH333N features a high-efficiency brushless motor, designed to improve energy efficiency and reduce maintenance compared with traditional brushed motors.

Benefits include:

• Efficient use of battery power

• Reduced motor maintenance

• Consistent performance under demanding workloads

• Improved durability through fewer wearing motor components

This makes the tool suitable for regular professional use.

High-Speed Drilling Performance

The DeWalt DCH333N is designed for fast and productive masonry drilling.

Its published performance figures include:

• No-load speed: 0–1,000 RPM

• Impact rate: 0–4,480 blows per minute

• Impact energy: 3.5J

DeWalt also advertises performance of more than 66 holes measuring 18mm diameter × 80mm depth per charge under specified test conditions with a suitable FLEXVOLT battery.

Actual drilling performance and battery runtime will vary depending on the battery capacity, concrete hardness, bit condition and operating conditions.

Battery not included.

DeWalt Perform & Protect – Reduced Vibration

The DCH333N incorporates DeWalt's Perform & Protect design, helping reduce vibration transmitted to the operator.

Published vibration figures include:

• Hammer drilling into concrete: 7.5m/s²

• Chiselling: 8.5m/s²

• Drilling into metal: Approximately 2.5m/s² or lower, depending on the test specification

Reduced vibration can improve operating comfort and help manage vibration exposure during repetitive work.

Operators must still follow appropriate health and safety guidance, including workplace vibration exposure limits and recommended rest periods.

Bright LED Work Light

An integrated bright white LED work light helps illuminate the drilling area.

This is particularly useful when working in:

• Dimly lit construction sites

• Utility rooms

• Under-stair spaces

• Basements

• Renovation areas

• Confined working environments

The light includes a delay feature to provide visibility immediately after operation.

Ergonomic Design & Multi-Position Side Handle

The DCH333N features an ergonomic design intended to provide secure handling and improved control.

A multi-position side handle gives the operator an additional grip point when drilling or chiselling.

The tool's balanced construction helps make it practical for repeated drilling tasks.

For safe operation, use both hands where appropriate and follow the manufacturer's guidance.

SDS-Plus Tool Holder

The DCH333N uses an SDS-Plus tool holder, designed for compatible SDS-Plus drill bits and chisels.

This system allows the hammer mechanism to transfer impact energy efficiently to suitable accessories.

It is particularly useful for masonry drilling and light chiselling applications.

Always ensure the selected bit or chisel is suitable for the material and operating mode.

Ideal for Professional Building & Installation Work

The DeWalt DCH333N is a practical choice for a wide range of trades and applications, including:

• Builders and general contractors

• Electricians

• Plumbers and heating installers

• Mechanical installers

• Maintenance professionals

• Renovation specialists

• Construction and site workers

• Experienced DIY users undertaking demanding projects

Its cordless design is particularly useful where access to mains power is limited.

DeWalt DCH333N Technical Specifications

Dimensions & Weight

Dimensions and weight may vary slightly between published regional specifications.

What's Included?

The DeWalt DCH333N Body Only package includes:

• 1 × DeWalt DCH333N 54V XR FLEXVOLT Brushless SDS-Plus Hammer Drill

• 1 × Multi-Position Side Handle

Not included:

• 54V XR FLEXVOLT battery

• Battery charger

• Carry case

• Drill bits or chisels

Confirm the exact accessory contents against the supplied retail packaging.

Important Battery Compatibility Information

The DCH333N is designed for use with compatible DeWalt 54V XR FLEXVOLT batteries.

If you already own suitable FLEXVOLT batteries and a compatible charger, the body-only version allows you to add this rotary hammer to your existing tool collection without paying for another battery and charger.

If you are new to the FLEXVOLT system, you will need to purchase the appropriate battery and charger separately.

This product cannot operate without a compatible battery.

Why Choose the DeWalt DCH333N?

The DeWalt DCH333N combines powerful drilling performance with cordless convenience.

Its 3.5J impact energy, 30mm concrete capacity, brushless motor, three operating modes and vibration-control design make it a versatile tool for professional masonry drilling and light chiselling.

Whether you're drilling anchor holes, installing fixings or removing tiles, the DCH333N is built to handle demanding tasks.

Buy DeWalt DCH333N 54V FLEXVOLT Hammer Drill at Keans Claremorris

Looking for a DeWalt 54V SDS-Plus Hammer Drill in Ireland?

The DeWalt DCH333N XR FLEXVOLT Brushless 3-Mode Hammer Drill delivers the performance, versatility and cordless freedom required for professional drilling and light chiselling applications.

With its 54V brushless motor, 3.5J impact energy, 30mm concrete drilling capacity and Perform & Protect vibration-control technology, it's an excellent addition to a compatible DeWalt FLEXVOLT tool collection.

Shop the DeWalt DCH333N Body Only at Keans Claremorris, Ireland, for professional cordless power tools and accessories.

Please note: Body only – battery and charger sold separately.