Joint-It Supreme Colour Enhancer

Joint-It Supreme Colour Enhancer

Regular price €29,99
Unit price  per 

Joint-It Supreme Colour Enhancer

Standard Shipping €4.99

Nationwide Delivery Available

Product Details

Intensifies the natural colour of Natural Stone and Concrete paving, paths, roof tiles and walls.




Keep in a dry place between 5°C and 30°C in the original container.

joint it benefits icon



  • Ready-to-use
  • Stain Resistant
  • Quick Drying
  • Breathable
  • Environmentally Friendly
  • Strong and Effective
  • Also suitable for use on paths, roof tiles and walls.


Icon for measurements & calvculations

Surface Preparation

Joint-It Supreme Colour Enhancer will not work on non-porous surfaces.

Remove surface contamination.

Surface should be clean, free from dust, dirt, oil, efflorescence, organic growth, coatings, sealers and old paint films.

Treat any algae and mould prior to application of Joint-It Supreme Colour Enhancer.

Cracks in surface should be repaired prior to application of Joint-It Supreme Colour Enhancer.

Icon for measurements & calvculations


Coverage depends on the porosity, type and texture of your surface.

A general guideline is 5-8m² per litre.

Find out how much you will need by using our calculator.

hand icon

Precautions For Use

Joint-It Supreme Colour Enhancer will not work on non-porous surfaces.

Do not apply Joint-It Supreme Colour Enhancer if rain is expected in four hours.

Do not dilute this product.

Product works immediately but it may take up to 7 days to reach 100% efficacy.

Do not apply a second coat if first coat has dried. Do not apply during rain or frost or when temperature drops below 3°C or above 30°C.

Wear protective gloves, glasses and appropriate clothing while using Joint-It Supreme Colour Enhancer.

Keep children and pets off surface until it is completely dry.

icon of a trowel

Application Instructions

Always test a small hidden area before using this product.


Using a low pressure spray, roller or brush, apply product to the point of saturation. Ensure application is from bottom to top on vertical surfaces. Take care not to let the product run.

As the product starts to soak into the substrate, add a second coat, if required. DO NOT ALLOW PRODUCT TO DRY BETWEEN APPLICATIONS.

Clean equipment and tools with water immediately after use.