Joint-It Fine

Joint-It Fine

  • €45,00


Weed Resistant Natural Sand for Brick Paving

For joints less than 3mm wide

Available in 2 colours:  Neutral and Grey

Sold in 20KG Bags. (€4.99 shiping/bag) 

 

Storage-icon

Storage

Store product, including open bags, in a dry place. Product does not cure/harden on contact with air. Product will be adversely affected by storage in damp conditions.

joint it benefits icon

Benefits

 

  • Ready-to-use
  • Quick, sweep-in application
  • Weed Resistant
  • Frost Resistant
  • Non-polymer 100% Natural Raw Materials
  • Non-Hazardous
  • Non-Staining
  • Water Permeable
  • Certified Environmentally Friendly

 

Icon for measurements & calvculations

Surface Preparation

Ensure that surface is clean and dry before opening the bag.

You will need a compactor/wacker plate and a leaf blower to complete the application of Joint-It® Fine.

Icon for measurements & calvculations

Coverage

Each bag of Joint-It Fine will cover approximately 10m² of brick/block paving where the joints are less than 3mm wide.

Find out exactly how much Joint-It Fine you will need by using our calculator.

hand icon

Precautions For Use

Always test a small hidden portion of the surface before use to ensure appearance and performance is acceptable. Suitable for lightly loaded surfaces (up to 3.5 tonnes).

Joint-It Fine should be applied in dry weather conditions at temperatures above 2°C.

Joint-It Fine should only be used with block/brick paving laid on a water-permeable base with joints under 3mm wide.

icon of a trowel

Application Instructions

Sweep sand into clean and dry joints.

Compact sand into joints using a vibrator / whacker plate.

Use a leaf blower to remove excess sand from the top of the surface.

Wet paving with a light, fine spray and wait 5-10 minutes. Then thoroughly soak the paving.

 

MORE INFO: https://jointit.com/products/joint-it-fine/

PRODUCT CALCULATOR: https://jointit.com/product-calculator/


We Also Recommend